Skip to content

★★★★★5 star reviews

Product Overview

Leak Diverter Hose

The Leak Diverter Hose by SpillTech is a 25-foot clear PVC drain hose with brass fittings, designed to channel collected water from roof and pipe leak diverter panels to a drainage point. The 3/4-inch diameter hose connects to the drain outlet on all SpillTech leak diverter panels. Clear construction allows visual verification of water flow. Weighs 1.8 lbs. The 25-foot length provides flexibility to route water to buckets, floor drains, exterior doorways, or collection containers away from the leak area.

Technical Specifications

Leak Diverter Hose

SKU ALDHOSES
Length 25 feet
Diameter 3/4 inch
Material Clear PVC with Brass Fittings
Color Clear
Weight 1.8 lbs
Manufacturer SpillTech

Expert Insights

The 25-foot hose length is sufficient for most installations, routing water from the ceiling-mounted diverter down to floor level and over to a drain or container. The clear PVC lets you monitor water flow and check for contamination (oil sheens, discoloration) without disconnecting anything. Brass fittings resist corrosion and provide a secure, leak-free connection to the diverter drain outlet. For longer runs, connect two hoses together. Route the hose along walls or column lines to keep it out of foot traffic and forklift paths. Secure the hose with cable ties or tape to prevent tripping hazards. Keep a spare hose in your leak response kit — they are inexpensive and critical for directing water away from sensitive areas.

Frequently Asked Questions

Leak Diverter Hose

Is this hose compatible with all SpillTech leak diverters?

Yes, the ALDHOSES 25-foot hose connects to the drain outlet on the 5x5 (ALD55S), 10x10 (ALD1010S), and pipe (ALD1818S) leak diverter panels. The 3/4-inch brass fitting provides a secure connection.

Can I connect two hoses for a longer run?

Yes, two hoses can be connected together for a 50-foot run. The brass fittings allow coupling. For very long runs, ensure the hose has adequate slope for gravity drainage — water will not flow uphill.

Why is the hose clear instead of colored?

The clear PVC allows visual monitoring of water flow without disconnecting the hose. You can see if water is flowing, check for blockages, and observe water color/clarity to detect potential contamination from the leak source.

How do I prevent the hose from becoming a tripping hazard?

Route the hose along walls, column bases, or under equipment racks. Secure it with cable ties, duct tape, or hose clips at regular intervals. Use bright tape or floor markers to highlight any sections that cross foot traffic areas.

Cross-Reference Guide

This product is compatible with applications that use the following part numbers:

  • introLeak diverter system components and compatible products:
  • partsALDHOSESALD55S (5x5 diverter)ALD1010S (10x10 diverter)ALD1818S (pipe diverter)ALDSTRAPS (hanging straps)
  • noteSpillTech 25-foot Clear Drain Hose for leak diverters. AbsorbentsOnline SKU: ALDHOSES. Compatible with all SpillTech leak diverter panels.