Product Information

Inline drum spill pallets are a great space saver for drum storage. Line all of your drums along the wall in your facility. Spill deck pallets are perfect for organizing multiple drums and containing spillage. If you have a variety of chemicals you have to access frequently then this is the storage solution.

The drum spill pallets will only stick out a little over 26 inches leaving more open floor space in the center of your building. An optional ramp and the low profile of the pallets make it easier to safely load and unload drums.

Modular & Single Spill Deck Options

Besides our standard stand alone 1, 2 and 4 drum models (A1633INE, A1632INE & A1647INE) we have modular spill deck models A2360INU, A2361INU & A2333INU which can be connected together allowing spills to flow from one deck to another. These spill decks also come with a bladder attachment for more sump capacity.

These drum spill pallet units are pre-drilled and can be assembled without tools. The bulkhead fittings lock the connected modules together. These inline drum spill pallets come in 3, 4 and 5 drum configurations but you can customize them to any configuration you need. View a video with assembly and product features on YouTube.

Fittings & Additional Bladder Spill Capacity

Bladders should not be reused. Replacement bladders can be purchased for models A2360INU, A2361INU & A2333INU. Fittings for attaching the drum spill pallets together and t-strips are included in the cost of these models. A bladder will roll out 65.5 inches away from the deck and the width is approximately 66 inches if completely unfurled.

Durable Construction

All of the spill deck pallets on this page are made with polyethylene, the pallets are very durable and chemical resistant. The light poly grates can be easily removed for cleaning. Meets EPA requirements for secondary spill containment of hazardous materials. The inline drum spill pallets are available in many options to handle any number of drums you may have.

If you are going to be dispensing from the drums be sure to use our drum top pads to protect the walls of your location from any fluids. The spill pallets have plenty of sump capacity to handle most leaks.

Check to see if the chemicals at your facility have compatibility with our pallets. See our High Density Polyethylene Chemical Resistance Guide. If you need spill pallets for aggressive chemicals you keep at your facility, these types of containment pallets can be found here.

Always check with local regulators before purchasing but these products can help you comply with SPCC, UFC and regulation 40 CFR 264.175. For an overview of all of the regulations see the Federal Regulatory Compliance Summaries here.

Technical Information

• Polyethylene construction
• Patented removable poly grating
• Dimensions, sump capacity, load capacity and weights for each pallet noted below in Description.
• Optional poly pallet ramp for 2 and 4 drum inline spill pallets
• High Density Polyethylene Chemical Resistance Guide
  
  

View Our Inline Spill Deck Product Video

Compliance Information

• 40 CFR 264.175
• See Federal Regulatory Compliance Summaries here.

WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

The above warning only applies to item A1089INU below.